1.4401化學成分 - DIN EN 10088-1

C	Si	Mn	P	S	Cr	Mo	Ni	N
≤0.07	≤1.00	≤2.00	≤0.045	≤0.015	16.5-18.5	2.00-2.50	10.0-13.0	≤0.11

---

1.4401標準規(guī)范

• DIN EN 10088-1 - Stainless steels - Part 1: List of stainless steels
• DIN EN 10088-2 - Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
• DIN EN 10088-3 - Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
• DIN EN 10088-4 - Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
• DIN EN 10028-7 - Flat products made of steels for pressure purposes - Part 7: Stainless steels
• DIN EN 10088-5 - Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
• DIN EN 10216-5 (2004) - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
• DIN EN 10217-7 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
• DIN EN 10250-4 - Open die steel forgings for general engineering purposes - Part 4: Stainless steels
• DIN EN 10253-3 - Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
• DIN EN 10253-4 - Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
• DIN EN 10272 - Stainless steel bars for pressure purposes
• DIN EN 10296-2 (2005) - Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
• DIN EN 10297-2 (2005) - Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
• DIN EN 10222-5 - Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
• DIN EN 10263-5 - Steel rod, bars and steel wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
• DIN EN 10264-4 (2002) - Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire
• DIN EN 10269 - Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
• DIN EN 10270-3 - Steel wire for mechanical springs - Part 3: Stainless spring steel wire
• DIN 1654-5 (1989) - Cold heading and cold extruding steels; technical delivery conditions for stainless steels
• DIN 17224 (1982) - Stainless steel wire and strip for springs; technical delivery conditions
• DIN 17440 (2001) - Stainless steels - Technical delivery conditions for drawn wire
• DIN 17440 (1975) - Stainless steels - Technical delivery conditions for drawn wire
• DIN 17441 (1997) - Stainless steels - Technical delivery conditions for cold rolled strips and slit coils strip and sheets cut from such strips for pressure purposes
• DIN 17455 (1985) - Welded circular tubes of stainless steels for general requirements; technical delivery conditions
• DIN 17456 (1985) - Seamless circular tubes of stainless steels for general requirements; technical delivery conditions
• DIN 17457 (1985) - Welded circular tubes of austenitic stainless steels for special requirements; technical delivery conditions
• DIN 17458 (1985) - Seamless circular tubes of austenitic stainless steels for special requirements; technical delivery conditions
• DIN 5512-3 - Materials for rail vehicles - Steels - Part 3: Stainless steel flat products; Selected standard

---

1.4401機械性能

DIN 1654-5 (1989) Cold heading and cold extruding steels; technical delivery conditions for stainless steels; Replaced by DIN EN 10263-5:2002

---

1.4401產品形態(tài)

• 熱軋和冷拉棒材, 圓棒, 扁鋼, 六角棒, 八角棒, 空心棒
• 帶鋼和鋼卷, 熱軋帶鋼, 熱軋鋼卷, 冷軋鋼帶, 冷軋鋼卷
• 冷軋板材, 熱軋板, 冷軋薄板, 中厚板, 高強鋼板
• 熱軋和冷拉異型鋼, 凹凸字鋼, 滑軌, 滑塊
• 熱軋和冷拉鋼絲, 扁絲, 盤條, 直條
• 自由鍛和模鍛, 扁鋼, 模塊, 環(huán), 桶, 餅, 階梯軸及定制化
• 熱擠壓和冷軋無縫管, 異型管, 方管, 毛細管
• 電渣錠

---