403(UNS S40300) STAINLESS STEEL FLAT BAR
產品參數
- 冶煉方式: 選擇
- 產品尺寸: Customize
- 交貨狀態: 鍛造 、調質 、
- 表面狀態: 銑削 、
- 庫存狀態: 訂貨
產品詳情
GH4033 : GB/T 14992 (2005) 化學成分
| C | Cr | Ni | Al | Ti | Fe | Si | Mn | P | S | B | Ce |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.03 - 0.08 | 19.0 - 22.0 | ≤ Remainder | 0.60 - 1.00 | 2.40 - 2.80 | ≤ 4.0 | ≤ 0.65 | ≤ 0.35 | ≤ 0.015 | ≤ 0.007 | ≤ 0.01 | ≤ 0.01 |
GH4033 : GB/T 14992 (2005) 力學性能
| 熱處理 | 最小值 | 最大值 | 近似值 | 備注 |
|---|
| 熱處理 | 最小值 | 最大值 | 近似值 | 備注 |
|---|
| 熱處理 | 最小值 | 最大值 | 近似值 | 備注 |
|---|
| 熱處理 | 最小值 | 最大值 | 近似值 | 備注 |
|---|
| 熱處理 | 最小值 | 最大值 | 近似值 | 備注 |
|---|
| 熱處理 | 類型 | 最小值 | 最大值 | 近似值 | 備注 |
|---|
This straight chromium stainless steel offers reasonable corrosion resistance and high mechanical characteristics. The 403 Series offers heat resistance and a scaling temperature of about 1300°F. It is a corrosion and heat resistant 12% Cr martensitic stainless steel. This alloy offers a wide range of mechanical properties that are obtainable by appropriate heat treatments. It is easily hardened by oil, fan or air cooling and may be tempered at temperatures of up to 1350°F (732°C) to improve fracture toughness. Oil or fan cooling is required in thicker sections
This material is well established: the Further Reading section below cites a number of published standards, and that list is not necessarily exhaustive.
It has the lowest base cost and a moderately low embodied energy among wrought martensitic stainless steels.
The properties of AISI 403 stainless steel include two common variations. This page shows summary ranges across both of them. For more specific values, follow the links immediately below. The graph bars on the material properties cards further below compare AISI 403 stainless steel to: wrought martensitic stainless steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.