Nickel 200化學成分 - ASTM B160

C	Si	Mn	S	Ni	Cu	Fe	Mg	Ti	Co
≤0.15	≤0.35	≤0.35	≤0.01	Bal- ≥	≤0.25	≤0.40	≤0.20	≤0.10	≤2.00

---

Nickel 200標準規范

• ASTM B160 -
• ASTM B162 -
• BS 3075 NA11 -
• BS 3076 NA11 -

---

Nickel 200機械性能

• Electronic components.
• Electrical components.
• Lead in wires for heating elements.
• Battery connections/terminals.
• Chemical processing.
• Aerospace components..
• Food processing.
• Synthetic fibre processing.

Density	8.89 g/cm³	0.321 lb/in³
Melting Point	1446°C	2635°F
Coefficient of Expansion	13.3 μm/m °C (20 – 100°C)	7.4 x 10-6 in/in °F (70 – 212°F)
Modulus of Rigidity	81 kN/mm²	11748 ksi
Modulus of Elasticity	204 kN/mm²	29588 ksi

Electrical Resistivity
9.6 μΩ ? cm	58 ohm ? circ mil/ft

Thermal Conductivity
70.2 W/m ? °C	487 btu ? in/ft2 ? h ? °F

> Properties
Condition	Approx. tensile strength		Approx. operating temperature
	N/mm²	ksi
Annealed	400 – 500	58 – 73	Tensile strength and elongation drop significantly at temperatures above 315°C (600°F). Service temperature is dependent on environment, load and size range.

---

Nickel 200產品形態

• 熱軋和冷拉棒材, 圓棒, 扁鋼, 六角棒, 八角棒, 空心棒
• 帶鋼和鋼卷, 熱軋帶鋼, 熱軋鋼卷, 冷軋鋼帶, 冷軋鋼卷
• 冷軋板材, 熱軋板, 冷軋薄板, 中厚板, 高強鋼板
• 熱軋和冷拉異型鋼, 凹凸字鋼, 滑軌, 滑塊
• 熱軋和冷拉鋼絲, 扁絲, 盤條, 直條
• 自由鍛和模鍛, 扁鋼, 模塊, 環, 桶, 餅, 階梯軸及定制化
• 熱擠壓和冷軋無縫管, 異型管, 方管, 毛細管
• 電渣錠

---